Grid & Engineering

Two-Phase Immersion Cooling

2PICBoiling Liquid CoolingEvaporative Datacenter Cooling
Updated: 2026-08-15
TRL: 7 / 9
Global Coverage
Section I · Technical Overview
What is Two-Phase Immersion Cooling?

Two-Phase Immersion Cooling submerses high-density AI servers directly into an engineered fluorocarbon fluid. The fluid boils upon contact with hot GPUs, utilizing the massive 'latent heat of vaporization' to remove thermal loads exceeding 200 kW per rack, obsoleting traditional air conditioning.

Section II
The Engineering Reality

Standard cooling relies on sensible heat (warming up air or water). 2PIC relies on latent heat (phase change). The server sits in a sealed bath of dielectric fluid boiling at ~50°C. Vapor bubbles rise, hit a water-cooled condenser coil at the top of the tank, and rain back down as liquid. The phase change transfers heat at orders of magnitude higher efficiency than air, driving data center PUE down to ~1.02.

Latent Heat Transfer
$$ Q = m_{dot} * h_{fg} $$
Q = Heat energy removed from the GPU (Watts)m_dot = Mass flow rate of the evaporating fluid (kg/s)h_fg = Latent heat of vaporization of the dielectric fluid (J/kg)
1

Dielectric Submersion

Stripped-down servers (no fans, raw heatsinks) are lowered into a sealed tub filled with non-conductive engineered fluid (e.g., formerly 3M Novec).

2

Nucleate Boiling

Heat fluxes from 1000W+ GPUs trigger micro-boiling at the chip surface. Specialized boiling enhancement coatings on the heat spreaders maximize bubble nucleation.

3

Vapor Condensation

The vapor cloud rises and contacts a condenser coil running facility water (often warm water at 30-40°C), condensing back to liquid.

4

Dry Cooler Rejection

Because the facility water can be warm (40°C) and still condense the 50°C vapor, chillers are eliminated. Simple rooftop dry coolers reject the heat to the atmosphere.

Section III · August
Market Impact, Bottlenecks & Key Players
100-250kW/Rack
Cooling density enabled by 2PIC (vs ~15kW for standard air cooling)
1.02PUE
Power Usage Effectiveness achievable, indicating near-zero cooling overhead
90%
Reduction in data center cooling energy consumption compared to forced air
0Liters
Water consumed by the system (operates entirely closed-loop)
⚡ Intelligence: The explosion of Generative AI (NVIDIA Blackwell/B200 chips) has physically broken the limits of air cooling. While Direct-to-Chip cold plates are the 2025 stopgap, hyperscalers are piloting 2PIC for next-gen clusters to maximize compute per square foot and drastically cut power draw.
Commercial Bottlenecks
  • PFAS Regulation: The miraculous boiling fluids (PFPEs) fall under severe 'forever chemicals' (PFAS) regulatory bans in the EU and US, forcing chemical giants like 3M to exit production and stalling industry momentum.
  • Vapor Loss Cost: Dielectric fluids cost hundreds of dollars per gallon. Even minor vapor leaks during server maintenance events destroy operating economics.
  • Hardware Warranties: Plunging optical transceivers and standard PCB adhesives into boiling solvents can dissolve thermal pastes and void OEM hardware warranties.
Key Market Players - August 2026
LiquidStack
USA / Netherlands
The prominent pure-play provider of commercial 2-Phase Immersion Cooling tanks for AI workloads.
Chemours
USA
Chemical giant racing to synthesize next-generation low-GWP, non-PFAS boiling dielectric fluids.
Microsoft
USA
Hyperscaler heavily funding 2PIC R&D to hit zero-carbon, zero-water datacenter commitments.
Section IV · Maturity Assessment
Hype vs. Reality - TRL Assessment
TRL Score: 7 / 9 PROTOTYPE
Research (TRL 1)Prototype (TRL 5)Commercial (TRL 9)