Post-Combustion Capture is the brute-force method of decarbonization. It bolts a massive chemical plant onto the exhaust stack of an existing coal or gas facility, using liquid solvents to chemically scrub the CO2 out of the dilute, low-pressure exhaust gas before it escapes into the atmosphere.
Flue gas from a standard power plant is mostly Nitrogen, with CO2 concentrations at a dismal 4% (gas) to 14% (coal). The gas is cooled and blown upward through a massive absorber column. A liquid amine solvent (like MEA) rains down, chemically reacting with the CO2. The 'rich' solvent is pumped to a stripper column and boiled (using steam stolen from the power plant's turbine). The heat breaks the chemical bond, releasing pure CO2 gas and regenerating the 'lean' solvent to be used again.
Flue Gas Conditioning
Before capture, the exhaust must be violently scrubbed of SOx and NOx; these impurities will permanently bond with and destroy the expensive amine solvent.
Absorption
The gas flows through packed beds to maximize surface area, allowing the amine to capture ~90% of the passing CO2 molecules.
Stripping & Compression
The solvent is boiled at ~120°C. The released CO2 is then compressed by massive electrical motors to 150 bar for pipeline transport.
- Solvent Degradation: Oxygen and heat break down the amine molecules over time, creating highly toxic degradation products (nitrosamines) that must be handled.
- Footprint: The absorption columns required to process the exhaust of a 1GW gas plant are the size of skyscrapers, often requiring more land than the power plant itself.