Molten Salt Thermal Storage is the heavy-industry backbone of Concentrated Solar Power (CSP). By melting thousands of tons of nitrate salts and storing them in massive thermos-like tanks, solar plants can dispatch perfectly smooth, synchronous turbine power in the middle of the night, fundamentally solving solar's intermittency.
The standard medium is 'Solar Salt' (60% Sodium Nitrate, 40% Potassium Nitrate). It is a solid at room temperature and must be pre-melted. In a two-tank system, 'cold' salt (290°C) is pumped to a solar receiver tower where concentrated sunlight heats it to 565°C. The hot salt flows into a 'hot' storage tank. To generate power, the hot salt is pumped through a heat exchanger, boiling water into high-pressure steam to drive a standard Rankin cycle turbine.
Solar Heating
Thousands of heliostats focus sunlight onto a central receiver, superheating the flowing salt.
Thermal Buffering
The hot tank holds gigawatt-hours of thermal energy with minimal losses (~1°C per day) due to massive scale (low surface-area-to-volume ratio).
Steam Generation
Salt is pumped through a steam generator, producing superheated steam for the turbine, then returning to the 'cold' tank at 290°C.
- Freezing risk: If pumps fail and the salt freezes in the pipes, the pipes must be physically cut out and replaced. Heat tracing is a massive parasitic load.
- Corrosion: Hot nitrate salts at 565°C aggressively corrode standard steel alloys, requiring incredibly expensive stainless steel or Inconel tank liners.