Grid & Engineering

Direct-to-Chip Liquid Cooling

Cold Plate CoolingD2CChip-Level Liquid Cooling
Updated: 2026-08-15
TRL: 9 / 9
Global Coverage
Section I · Technical Overview
What is Direct-to-Chip Liquid Cooling?

Direct-to-chip liquid cooling uses cold plates bonded to CPUs/GPUs to circulate liquid (typically water or a water/glycol mix) and extract heat directly from the silicon. In 2026, it is the mandatory standard for high-density AI accelerators exceeding 1 kW TDP, completely displacing traditional forced-air convection in AI clusters.

Section II
The Engineering Reality

Air cooling reaches physical limits around 20-30 kW per rack. D2C cooling uses microchannel cold plates where convective heat transfer coefficients are orders of magnitude higher than air. A Coolant Distribution Unit (CDU) manages the secondary liquid loop, interfacing with the facility water system (primary loop) to reject heat.

Single-Phase Sensible Heat Transfer
$$ Q = m_{dot} * c_{p} * ΔT $$
Q = Heat removed (kW)m_dot = Coolant mass flow rate (kg/s)c_p = Specific heat capacity of coolant (kJ/kg°C)ΔT = Temperature difference between inlet and outlet (°C)
1

Cold Plate Design

Skived copper microchannels are engineered into cold plates attached to the chip via a high-performance Thermal Interface Material (TIM).

2

CDU Operation

Coolant Distribution Units (CDUs) pump the working fluid through the server loops, tightly regulating flow, pressure, and maintaining supply temperatures around 30-45°C.

3

Manifold Distribution

Rack manifolds distribute coolant to individual servers via drip-less quick disconnect (QD) fittings, ensuring concurrent maintenance capability.

4

Heat Rejection

The heat is transferred to a facility water loop via a plate heat exchanger inside the CDU, then rejected outdoors via cooling towers or dry coolers.

Section III · August
Market Impact, Bottlenecks & Key Players
80-90%
Percentage of server heat captured directly by D2C liquid cooling
100+kW
Per-rack power density achievable with Direct-to-Chip cooling
1.10PUE
Typical facility PUE enabled by eliminating high-power server fans
$3.5B
Estimated global D2C liquid cooling market by 2028
⚡ Intelligence: The release of next-generation AI silicon (like NVIDIA's Blackwell and GB200 architectures) forced data center operators to abandon air cooling. Colocation providers are actively retrofitting legacy whitespace to support D2C CDUs to capture lucrative hyperscaler AI deployments.
Commercial Bottlenecks
  • Leakage Risk: Despite advanced quick disconnects, introducing pressurized water into server chassis remains a severe catastrophic risk requiring sophisticated leak detection tape.
  • Weight and Floor Loading: Liquid-filled racks exceed 1,500 kg, requiring expensive structural reinforcement of raised floors in legacy data centers.
  • Supply Chain: The exponential demand for brazed plate heat exchangers and specialized CDUs has created 12-18 month lead times.
Key Market Players - August 2026
CoolIT Systems
Canada
A dominant supplier of D2C cold plates and CDUs for major server OEMs.
Vertiv
USA
Major infrastructure provider scaling heavily into high-density liquid cooling solutions.
NVIDIA
USA
Designing liquid-cooling reference architectures (like NVL72) that define the industry standard.
Section IV · Maturity Assessment
Hype vs. Reality - TRL Assessment
TRL Score: 9 / 9 ADVANCED PILOT
Research (TRL 1)Prototype (TRL 5)Commercial (TRL 9)